Idect phones manual

When you move back within range, the handset will automatically reconnect to the base. Put the handset on the base or charger to end the call. Call Timer Your handset automatically times the duration of every call. The call timer will display for a few seconds after the call has been made. Store a Redial Number into the Phonebook 1. Page Find The Handset Paging 4. Press on the base station. Press on any handset or on the base station again to stop paging.

Page Call All Handsets 4. Call All Handsets 1. In idle mode, press and the screen displays all registered handsets. Press to ring to all registered handsets.

Each phonebook entry can have a maximum of 24 digits for the phone number and 12 characters for the name. You can also select different melodies for your phonebook entries. Page Writing Tips 5.

Writing Tips - Press to delete the last character or digit. In idle, press to access the phonebook. Press to select the entry you want to edit. Press then to select EDIT. Press then use the keypad to edit the name if applicable. Page Check Phonebook Status Check Phonebook Status You can check how many entries have been occupied in your phone and how many phonebook entries are available for you to store in the phonebook.

Press to access the phonebook. Date and Time Settings You will need to set the correct time and date so that you know when you received answering machine applicable to model with answering machine or call list entries. Set the Time, Date, and Year 1. Press then enter the time information according to 12 HR or 24 HR format.

The time will be in the format you set. Page Alarm 3. Press any key except in idle mode to make a direct call to the number set. Press to confirm. A total of 10 melodies are provided for your selection. Set Alert Tones A single beep is emitted when you press a key. You can turn on or off the key tone. You can also turn on the alert tones when low battery and out of range are detected. Page Rename The Handset 6. Rename the Handset 1. Press and enter the name of your handset 4. Set the Auto Answer If you turn on the auto answer feature, you can pick up the call without pressing any key.

Set the Base Ringer Volume You can set the ringer volume level. It is used to protect your phone against unauthorized use. The default system PIN code is Up to five handsets can be registered to a a single base station. Page Deregister A Handset Deregister a Handset You may need to deregister your handsets if you wish to change the designated handset number of your registered handsets. You are requested to enter the 4-digit PIN in order to de-register a handset from the base station.

NOTE You cannot deregister the handset that you are currently using. The number will be shown on the LCD when the phone is ringing. Follow Steps 1 and 2 in the section of View the Call list.

See Entering Names 3. Press 4. Press and then the selected call list number is displayed. Page Call List Category Call list Category You can choose to store all calls or only the unanswered missed calls into the call list. The screen message counter two digits seven segment display on the base will show the number of the messages when the answering system is on.

Old messages are played again after all new messages are played completely. Press to reconfirm and the display will be back to the precious menu after deletion. NOTE You cannot delete new messages, so you will have to play them before trying to delete. Record Memo on the Answering Machine You can record your memo message for another user. Press to select ANS. Press to stop and save your personalized OGM. You new saved OGM will playback automatically.

Alternatively, press to return to the previous screen without saving the personalized OGM. Page Set The Answer Delay 3. Page Change The Compression Rate 8.

Press to enter the new PIN. For details of how to set a new code, see the User Guide 8. Page 54 Keys While message is not While message is playing playing Delete the current message playing Repeat at playing the current message from the beginning. Press twice to skip backward to play the previous message Start playing Stop the current message playback messages.

Please contact the technical support of the network provider for further information. This telephone is not equipped with a grounding function!

Therefore some of the functions may be limited when used in PBX systems. Page 57 The conformity to the requirements is validated by the symbol. This equipment and all its components, subsystems and consumable materials form an integral part of this product and when you decide to dispose of them you have to take them to a local recycling centre for appropriate waste disposal, in compliance with the current regulations.

Details about the location of these centres can be obtained from your local authority. Please be aware of the local rules on separate collection of batteries. On when there is a new call in the calls list. The display also shows XX New Call. Flashes when you have a new Voice Mail message. This is a Caller Display service and is not usually available from UK network providers.

On when the handset ringer volume is off in Silence mode. Flashes when there is an incoming external call even when the ringer volume is off.

The display also shows X New Msg , where X indicates the number of new messages. The base unit and charging pod s should be placed on a level surface and in a location where:. To use your handset and base unit, you must be able to establish and maintain a radio link between them. Be aware that any large metal objects, like a refrigerator, a mirror, filing cabinet, etc, between the handset and the base unit may block the radio signal. Other solid structures, like walls, may also reduce the signal strength.

The ringer equivalence numbers RENs of all instruments phones, fax machines, etc. ONLY use the rechargeable batteries supplied with the handset. If it is placed correctly, try to remove and re-install the batteries. Please note that it is normal for the mains adaptor to become warm - this does not indicate a fault. Using other power adaptors may damage the unit. Note: When the handset is OFF, it cannot be used to make calls, including emergency calls.

It will not ring when there is an incoming call. To answer or make a call, you will need to switch it back on. It may take some time for the handset to re-establish a radio link with the base unit. If you have subscribed to Caller Display service, the time and date will be set automatically when you receive a call. Note: If you are using the speakerphone, stay close to handset so that the other party can hear you clearly.

Note: You may need to insert a pause in the number if your phone is connected to a PBX for example, after you dial 9 for an outside line, or while waiting for a computer access tone. Each pause entered will delay the dialling sequence by about 2 seconds. Note: Auto hang-up mode is set to On by default. You can simply.

There are three volume levels to choose from. When the maximum or minimum volume level is reached, the phone beeps twice. To stop paging, press FIND p again or press any key on any of the. You can store up to 50 entries in the phonebook for quick dialling.

Names can be up to 10 characters long and numbers up to 20 digits. You can also set different melodies for your phonebook entries, but these will only play if you subscribe to Caller Display and the incoming number matches the stored number. Press UP u or DOWN d to scroll through the list or use the keypad to enter the first letter of the name to go to the desired entry.

Note: Alternatively, you can review your phonebook entries via the main menu. Use the keypad to enter a name up to 10 characters. If you make a. Use the keypad to enter a number up to 20 digits. The melody is played as you make your selection. Welcome to ManualMachine. We have sent a verification link to to complete your registration. Log In Sign Up. Forgot password? Enter your email address and check your inbox. Please check your email for further instructions.

Enter a new password. Before operating this set, Ver. Press to turn back on. C Message counter - Shows the number of messages and status of the answering machine XX : Steady On - The number of old messages recorded. Selecting a menu option The phone uses a menu system on the handset to access all its features. What's on the display? What do the icons mean?

Flashes when there is an incoming intercom call. On steady when setting up or connected on an intercom call. On when the phonebook is accessed. On when the redial list is accessed. On when the keypad is locked.