Align tools rc

Place the upper bulkheads and shock tower assembly on the main bulkhead with the alignment tool still in place. While lightly pinching the upper bulkheads against the upper edge of the alignment tool, tighten the 4 screws that secure the upper bulkheads to the lower bulkheads. Tighten the 4 button head screws on the shock tower to secure to the upper bulkhead.

Now you may remove the 4 screws holding the upper bulkhead in place, alignment tool and pins. At this point you should have a lower and upper bulkhead assembly that is aligned and spaced properly. Cart 0. Add to Cart. Features: Aligns all 4 bulkheads at one time with keyed locators.

A Z-bend is probably the easiest way to make a solid connection on at least one end of a pushrod save the other end of the pushrod for an adjustable connector. These Z-Bend Pliers make this and many other jobs considerably easier. This slotting kit takes the hassle out of cutting or reopening hinge slots. Included in the kit is a center guide that fits any type of hinge and helps you achieve perfect alignment slots. The most important way to guarantee a successful first flight is to balance your plane properly.

For this important step, we rely on the Great Planes C. Machine for all but the largest airplanes. This tool is easy to use and is much more reliable than balancing the plane by picking it up by its wingtips. This is an essential tool. It seems as though whenever we use new props, the hole almost always has to be enlarged. The only sure and safe way to do this is with a prop reamer such as the one from Great Planes.

Using a hand drill or a drill press means that you run the risk of off-centering the hole and rendering the prop useless. This will never happen with a prop reamer. A squarely built plane will fly well and true. At some point, every ARF that you build will require the rudder to be squared up with the stabilizer.

This tool simplifies that task. If you like to build flat foamies, you will love this tool. With one simple pull across any control surface, it makes a clean, perfectly beveled cut that is ready for hinge tape. This tool is just the ticket for marking the exact location of the mounting hole in an engine or motor mount, but we also like to use it to mark the locations of the servo-mounting holes and for other critical hole placements. Sometimes, we modelers need only a quick trim on a stick of balsa, and one way to do this is with a hobby knife.

And this service is free of charge. Submit Buying Request. Submit your request about align rc. I agree to share my Business Card with quoted suppliers. Related Products. Images Search. Your email address is incorrect! Please agree with the Terms of Use!